This is a brand new Brake Master Cylinder Adapter plate for all Mopars from the 60's through the '80's. If you are running one of the old style cast iron brake master cylinders and wish to upgrade to the new style aluminum master, this is the adapter you need!

Are you thinking about converting to one of the disc brake setup's in your classic Mopar Muscle? If you are, also consider this upgrade at the same time. The brake line fittings are identical from your existing dual master cylinder to the new aluminum dual masters, the pushrod is the same for all the manual brake cars and if changing from power to manual (why??) you can get an adjustable pushrod from Mopar Performance (I can get those also!!).

If you have a 1967 or earlier Mopar, than you should also make the conversion from a single master cylinder to the dual. It is a fairly easy bolt-on and a large jump in safety. You will need the dual line plumbing from a later car and when you do it - add a new aluminum master cylinder with this adapter! - NO OTHER PARTS NEEDED!! to convert to the aluminum master!

I recently started a small fabrication shop in Northern NJ to build parts for the Mopar Restoration community. These adapters are one of my first products and are laser cut from 3/8" steel. They are profiled to save some unnecessary weight and have the mounting studs for the new aluminum dual master cylinder MIG welded in place. The adapters come complete with everything you need to install a new (late model) aluminum master cylinder on your Muscle or Race Mopar.